Akashic Guitar effects circuit lookup

1590A

Effects Layouts (blog)

Dan Armstrong Red RangerVerified

Based on the Dan Armstrong Red Ranger· 4 other boards clone it

Category
Boost
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Booster, Dan Armstrong

From the post

Here's a classic circuit from Dan Armstrong–the Red Ranger. It's a booster with a switch for boosting treble, full range, or bass. Original units didn't have a volume control, but it could easily be added to the output.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 18 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 8
×147Ω47read from the layout by eye
×13K3kread from the layout by eye
×28.2K8.2kread from the layout by eye
×210K10kread from the layout by eye
×127K27kread from the layout by eye
×2100K100kread from the layout by eye
×2220K220kread from the layout by eye
×11M1Mread from the layout by eye
Capacitors 5
×210pF10pread from the layout by eye
×110nF10nread from the layout by eye
×147nF47nread from the layout by eye
×34.7uF4.7uelectrolytic; read from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
Diodes 1
×11N58171N5817printed 5817; read from the layout by eye
Transistors 3
Q12N50882N5088read from the layout by eye
Q22N50882N5088read from the layout by eye
Q32N50872N5087PNP; read from the layout by eye
Switches 1
SwitchDPDT on/off/onDPDT ON/OFF/ONtoggle; Sw3 unconnected; read from the layout by eye

Other boards based on the Dan Armstrong Red Ranger