1590A · 2 knobs
Catalinbread V8 Fuzz EngineVerified
Based on the Catalinbread V8 Fuzz Engine· 2 other boards clone it
From the post
For the final Fuzz Friday of the year, here's another one from Catalinbread. It's a fairly unique design and much like the Hyperpak, it uses a 4007 chip and will fit in a 1590a.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 15 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×2 | 1K | 1k | read from the layout by eye | |
| ×1 | 10K | 10k | read from the layout by eye | |
| ×2 | 100K | 100k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 2M | 2M | read from the layout by eye | |
| Capacitors 6 | ||||
| ×1 | 47pF | 47p | read from the layout by eye | |
| ×1 | 100pF | 100p | read from the layout by eye | |
| ×1 | 47nF | 47n | read from the layout by eye | |
| ×1 | 100nF | 100n | read from the layout by eye | |
| ×1 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4001 | 1N4001 | printed 4001; read from the layout by eye | |
| ICs 1 | ||||
| ×1 | CD4007 | CD4007 | printed 4007, 14-pin DIP; read from the layout by eye | |
| Potentiometers 2 | ||||
| Gain | B500K | B500k | Potentiometer | read from the layout by eye |
| Volume | B10K | B10k | Potentiometer | read from the layout by eye |
Other boards based on the Catalinbread V8 Fuzz Engine
- Catalinbread V8 Fuzz Engine Dirtbox Layouts
- Dom Toretto Moonn Electronics · €4.50