Akashic Guitar effects circuit lookup

Enclosure not stated

Effects Layouts (blog)

PIC Relay Bypass

Based on the PIC Relay Bypass

Category
Utility
Layout
Unverified · no build reported at Effects Layouts (blog) yet
Tags
Utility

From the post

If you feel like getting into a bit of programing with your pedal building, this is probably a good place to start. The legwork was done and graciously shared by Coda Effects. It uses a PIC micro-controller to trigger a relay and LED indicator. To learn how to program the PIC12F675 read the original blog post on Coda Effects. Benoit has since updated the schematic, adding a photoFET to get rid of a pop that happened when triggered. So you'll need to read and use the code from this post as well. Thanks again to Benoit for sharing his code and all his hard work!

Update March 2, 2017: Benoit updated his schematic and code recently, so I've updated the layout to reflect that, as well as the hyperlinks above to the correct code.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 9 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 3
×110K10kread from the layout by eye
×11.5K1.5kread from the layout by eye
×11K1kread from the layout by eye
Capacitors 1
×147uF47uelectrolytic, drawn laid flat; read from the layout by eye
Diodes 1
×11N41481N4148read from the layout by eye
ICs 2
×1PIC12F675PIC12F675read from the layout by eye
×178L0578L05regulator; read from the layout by eye
Opto 1
×1TLP222ATLP222Aphoto relay; read from the layout by eye
Other 1
×1Takamisawa NA5W-KTAKAMISAWA NA5W-KDPDT relay; read from the layout by eye