Enclosure not stated · 1 knob
TaptationVerified
Based on the Taptation
From the post
Want to add tap tempo to a PT2399 delay? Using this chip from DIYSB and the layout below, you can add tap to any single PT2399 delay (Deep Blue Delay, Rebote, Faux Analog Echo, etc). The Pin 6 pad connects to the 6th pin of the PT2399, and the LED flashes at the rate of the tap.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 8 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| ×1 | 1K | 1k | read from the layout by eye | |
| ×1 | 100K | 100k | read from the layout by eye | |
| ×1 | 4.7K | 4.7k | read from the layout by eye | |
| Capacitors 1 | ||||
| ×4 | 100nF | 100n | read from the layout by eye | |
| ICs 3 | ||||
| ×1 | 78L05 | 78L05 | regulator, named in the wiring diagram; read from the layout by eye | |
| ×1 | Taptation | TAPTATION | pre-programmed tap tempo chip, 14-pin; read from the layout by eye | |
| ×1 | MCP41100 | MCP41100 | digital pot; read from the layout by eye | |
| Potentiometers 1 | ||||
| Time | B100K | B100k | Potentiometer | printed 100K Lin; read from the layout by eye |