Akashic Guitar effects circuit lookup
GATE

1590A · 1 knob

Effects Layouts (blog)

One-Knob Noise GateVerified

Based on the One-Knob Noise Gate

Category
Noise Gate
Controls
Gate
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Noise Suppressor

From the post

Found this one over on the Tagboard forum and thought it would be a good addition here. It's a simple noise gate with minimal parts count that can easily fit in a 1590a. I've laid it out for a board mounted pot. The schematic calls for a 1M pot, but people have built this using one as low as 25k, so experiment there. The original schematic was a little hard to read so I redrew it.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 16 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 5
×12.2M2.2Mread from the layout by eye
×1470K470kread from the layout by eye
×14.7K4.7kread from the layout by eye
×12.2K2.2kread from the layout by eye
×1220Ω220read from the layout by eye
Capacitors 5
×1220nF220nread from the layout by eye
×21uF1uelectrolytic; read from the layout by eye
×12.2uF2.2uelectrolytic; read from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
Diodes 2
×21N41481N4148read from the layout by eye
×11N58171N5817read from the layout by eye
Transistors 3
Q1BC549BC549read from the layout by eye
Q2BC549BC549read from the layout by eye
Q3BS170BS170MOSFET; read from the layout by eye
Potentiometers 1
GateB1MB1MPotentiometerread from the layout by eye