Akashic Guitar effects circuit lookup
SUSTAINTONEVOLUME

1590B · 3 knobs

Effects Layouts (blog)

Cornish G-2Verified

Based on the Cornish G-2· 5 other boards clone it

Category
Utility
Controls
Sustain · Tone · Volume
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Buffer, Cornish, Fuzz, Overdrive

From the post

Happy Fuzz Friday, everyone! As promised, here's my layout for the Pete Cornish G-2. The circuit is essentially a Big Muff (with a few different component values) with a simplified tone stack and input buffers. It's not quite as fuzzy or distorted as a typical BMP but more of a heavy overdrive. Though it can get fuzzy at higher Sustain levels. There is a bit of uncertainty over the type of diodes used in the clipping stages, so socketing is a good idea here. 1N34s or 1N60s are a good place to start.

As I mentioned earlier this week, I've also laid out the bypass buffer with a board mounted footswitch. It's a little too wide for a 1590B, but this and main circuit layout will fit very nicely in a 125B enclosure.

If you're building on perf and want to include the bypass buffer of the original you can use the Cornish Buffer layout and wire it like this:

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 37 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 16
×2100Ω100read from the layout by eye
×1120Ω120read from the layout by eye
×1620Ω620read from the layout by eye
×2680Ω680read from the layout by eye
×21K1kread from the layout by eye
×12.2K2.2kread from the layout by eye
×48.2K8.2kread from the layout by eye
×315K15kread from the layout by eye
×239K39kread from the layout by eye
×168K68kread from the layout by eye
×5100K100kread from the layout by eye
×1120K120kread from the layout by eye
×1150K150kread from the layout by eye
×1390K390kread from the layout by eye
×3470K470kread from the layout by eye
×11M1Mread from the layout by eye
Capacitors 8
×31nF1nread from the layout by eye
×210nF10nread from the layout by eye
×347nF47nread from the layout by eye
×4220nF220nread from the layout by eye
×34.7uF4.7uelectrolytic; read from the layout by eye
×222uF22uelectrolytic; read from the layout by eye
×1100uF100uelectrolytic; read from the layout by eye
×1220uF220uelectrolytic; read from the layout by eye
Diodes 5
D1??value not given; read from the layout by eye
D2??value not given; read from the layout by eye
D3??value not given; read from the layout by eye
D4??value not given; read from the layout by eye
×11N54011N5401printed 5401; read from the layout by eye
Transistors 5
Q1BC549BC549read from the layout by eye
Q2BC549BC549read from the layout by eye
Q3BC549BC549read from the layout by eye
Q4BC549BC549read from the layout by eye
Q5BC549BC549read from the layout by eye
Potentiometers 3
SustainA50KA50kPotentiometerread from the layout by eye
ToneB25KB25kPotentiometerread from the layout by eye
VolumeA10KA10kPotentiometerread from the layout by eye

Other boards based on the Cornish G-2