Enclosure not stated · 2 knobs
BYOC Reverb 2Verified
Based on the BYOC Reverb 2
From the post
Got a request to make a layout for this schematic, and it turns out it's the BYOC Reverb 2. You can use 9mm pots and board mount them from the component side if you like. There are a few jumpers, though one of them (the one by the lower IC) can be eliminated if you just stretch out that 22k resistor. Also, the electrolytic caps are folded down on their side so things will fit with board mounted 9mm pots. The Belton BTDR-2H can also be board mounted from the solder side. Don't feel like making the board yourself? You can buy a PCB or a complete kit from BYOC.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 20 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this layout was not sure of
- Regulator at the bottom left: the board prints only the pins I G O; the wiring diagram labels it 78L05
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| ×4 | 39K | 39k | read from the layout by eye | |
| ×4 | 22K | 22k | read from the layout by eye | |
| ×3 | 4.7K | 4.7k | read from the layout by eye | |
| ×3 | 10K | 10k | read from the layout by eye | |
| ×1 | 15K | 15k | read from the layout by eye | |
| ×1 | 82K | 82k | read from the layout by eye | |
| ×1 | 470K | 470k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 1K | 1k | read from the layout by eye | |
| ×1 | 220Ω | 220 | read from the layout by eye | |
| Capacitors 4 | ||||
| ×2 | 22nF | 22n | read from the layout by eye | |
| ×2 | 100nF | 100n | read from the layout by eye | |
| ×2 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×2 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N5817 | 1N5817 | read from the layout by eye | |
| ICs 2 | ||||
| ×2 | TL072 | TL072 | read from the layout by eye | |
| ×1 | 78L05 | 78L05 | regulator, named on the wiring diagram; read from the layout by eye | |
| Potentiometers 2 | ||||
| Reverb | B50K | B50k | Potentiometer | read from the layout by eye |
| Dwell | C10K | C10k | Potentiometer | read from the layout by eye |
| Other 1 | ||||
| ×1 | BTDR2 | BTDR2 | Belton reverb module, off board, pads 1-6; read from the layout by eye | |