1590A · 1 knob
Creepy Fingers FuzzBudVerified
Based on the Creepy Fingers Fuzzbud· 1 other board clones it
From the post
Here's a great sounding one-knob fuzz from Creepy Fingers Effects for your FuzzFriday. It's based on the fuzz section of the Colorsound Fuzz-Wah and follows the basic structure of the Fuzz Face, just with a fixed resistor in place of the fuzz control. Shouldn't be hard at all to fit in a 1590a enclosure.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 15 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 7 | ||||
| ×1 | 820Ω | 820 | read from the layout by eye | |
| ×1 | 100Ω | 100 | read from the layout by eye | |
| ×1 | 47K | 47k | read from the layout by eye | |
| ×1 | 5.6K | 5.6k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 100K | 100k | read from the layout by eye | |
| ×1 | 1K | 1k | read from the layout by eye | |
| Capacitors 4 | ||||
| ×2 | 100nF | 100n | read from the layout by eye | |
| ×1 | 220pF | 220p | read from the layout by eye | |
| ×1 | 47uF | 47u | electrolytic; read from the layout by eye | |
| ×1 | 10uF | 10u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| Transistors 2 | ||||
| Q1 | 2N2222 | 2N2222 | read from the layout by eye | |
| Q2 | 2N2222 | 2N2222 | read from the layout by eye | |
| Potentiometers 1 | ||||
| Volume | B50K | B50k | Potentiometer | read from the layout by eye |
Other boards based on the Creepy Fingers Fuzzbud
- Creepy Fingers Fuzzbud Dirtbox Layouts