1590A · 2 knobs
DOD Studio BiFET Preamp 410Verified
Based on the DOD Studio BiFET Preamp 410· 1 other board clones it
From the post
The original DOD units had "balanced" XLR output as well as the normal 1/4" jack and no footswitch. This has been adapted for stompbox use and could work well with acoustic guitar.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 3.9M | 3.9M | read from the layout by eye | |
| ×1 | 220K | 220k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×4 | 22K | 22k | read from the layout by eye | |
| Capacitors 4 | ||||
| ×2 | 10nF | 10n | read from the layout by eye | |
| ×1 | 22nF | 22n | read from the layout by eye | |
| ×3 | 4.7uF | 4.7u | electrolytic; read from the layout by eye | |
| ×1 | 47uF | 47u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| ICs 1 | ||||
| ×1 | TL081 | TL081 | read from the layout by eye | |
| Potentiometers 2 | ||||
| Tone | B100K | B100k | Potentiometer | read from the layout by eye |
| Volume | A100K | A100k | Potentiometer | read from the layout by eye |
Other boards based on the DOD Studio BiFET Preamp 410
- DOD Studio Bifet Preamp / 410 Tagboard Effects