Akashic Guitar effects circuit lookup
GAINPRESENCEVOLUMETREBLEMIDSBASS

1590BB · 6 knobs

Effects Layouts (blog)

Dr. Boogie DistortionVerified

Based on the Dr Boogie· 6 other boards clone it

Controls
Gain · Presence · Volume · Treble · Mids · Bass
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Amp Emulator, Distortion

From the post

100 layouts! Thanks to everyone who visits the blog and a special thanks to those of you who have built and verified some of these layouts.

The Dr. Boogie is a JFET-based amp emulator of the Mesa Boogie Dual Rectifier Solo head, designed by ElectraTabs over on the DIYStompboxes forum. It creates a unique high-gain distortion effect.

Most layouts and builds of this effect I've seen are in 1590BB enclosures. This one should fit in a 1590B, but would probably be more comfortable in a 125B. Use right angle PCB mount pots and mount them to the board from the solder-side. Mind the EQ row of pots are oriented 180º differently from the top row of pots.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 35 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 4 values the reader of this layout was not sure of
  • 20pF at row E, columns O-R (upper right): reads 20pF on both the board and the wiring diagram, but a leading 2 could be hidden under the pad (220pF); printed unusual value
  • 30nF at row C (top centre): printed clearly, unusual value
  • 5nF at row S (lower left): printed clearly, unusual value
  • 2M vertical resistor at column C, rows H-K: printed clearly, unusual value
RefValueNormalizedTypeNotes
Resistors 14
×2470K470kread from the layout by eye
×1680K680kread from the layout by eye
×12.2M2.2Mread from the layout by eye
×12M2Mread from the layout by eye
×21M1Mread from the layout by eye
×168K68kread from the layout by eye
×31.8K1.8kread from the layout by eye
×22.2K2.2kone feeds the LED pad; read from the layout by eye
×13.9K3.9kread from the layout by eye
×1330K330kread from the layout by eye
×1220K220kread from the layout by eye
×2100Ω100read from the layout by eye
×14.7K4.7kread from the layout by eye
×110K10kread from the layout by eye
Capacitors 12
×21nF1nread from the layout by eye
×130nF30nread from the layout by eye
×12.2nF2.2nread from the layout by eye
×1100nF100nread from the layout by eye
×322nF22nread from the layout by eye
×15nF5nread from the layout by eye
×16.8nF6.8nread from the layout by eye
×2220nF220nread from the layout by eye
×120pF20pread from the layout by eye
×3220pF220pread from the layout by eye
×31uF1uelectrolytic; read from the layout by eye
×2100uF100uelectrolytic; read from the layout by eye
Diodes 1
×11N40011N4001read from the layout by eye
Transistors 1
×5J201J201Q1-5, JFET; read from the layout by eye
Potentiometers 6
GainA1MA1MPotentiometerread from the layout by eye
PresenceB10KB10kPotentiometerread from the layout by eye
VolumeA100KA100kPotentiometerread from the layout by eye
TrebleA25KA25kPotentiometerread from the layout by eye
MidsB2.5KB2.5kPotentiometerread from the layout by eye
BassA100KA100kPotentiometerread from the layout by eye
Trimmers 1
×4100K100kread from the layout by eye

Other boards based on the Dr Boogie