1590A · 1 knob
Range BlasterVerified
Based on the Range Blaster
From the post
From Fuzz Central, this is a modified Dallas Rangemaster treble booster. Uses an NPN germanium transistor so you can daisy chain it with other pedals that run off a positive 9 volt supply.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×1 | 470K | 470k | read from the layout by eye | |
| ×1 | 3.9K | 3.9k | read from the layout by eye | |
| ×1 | 68K | 68k | read from the layout by eye | |
| ×2 | 1M | 1M | read from the layout by eye | |
| Capacitors 3 | ||||
| ×1 | 10nF | 10n | read from the layout by eye | |
| ×1 | 4.7nF | 4.7n | read from the layout by eye | |
| ×2 | 47uF | 47u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| ×1 | 1N34A | 1N34A | read from the layout by eye | |
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| Transistors 1 | ||||
| Q1 | NPN germanium | NPN GERMANIUM | read from the layout by eye | |
| Potentiometers 1 | ||||
| Boost | A10K | A10k | Potentiometer | read from the layout by eye |