1590BB2
PW-2 Power Driver
Based on the Boss PW-2 Power Driver· 1 other board clones it
- Category
- Distortion
- Price
- CA$16.50in stock
From the vendor
Circuit board for the PW-2 Power Driver DIY build. Includes Main PCB and Buffered Bypass PCB
This project is designed to fit a 1590BB2 enclosure. Sale is for the PCB's only, all other parts not included.
PCB Dimensions - 84mm x 60mm
Schematic
The schematic is in the vendor's build document, page 6. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 7 | ||||
| R1 | 10K | 10k | OCR | |
| R2 | 1M | 1M | OCR | |
| R3 | 27K | 27k | OCR | |
| R4 | 27K | 27k | OCR | |
| R5 | 4K7 | 4.7k | OCR | |
| R6 | 100k | 100k | OCR | |
| R7 | 560R | 560 | OCR | |
| Capacitors 3 | ||||
| C1 | 100n | 100n | OCR | |
| C2 | 47u | 47u | OCR | |
| C3 | 47u | 47u | OCR | |
| Diodes 2 | ||||
| D1 | 3k3 | 3K3 | OCR | |
| D3 | 4k7 | 4K7 | OCR | |
| ICs 1 | ||||
| IC1 | TL071 | TL071 | OCR | |
Other boards based on the Boss PW-2 Power Driver
- Tuco Dead End FX · 1590BBS · $15.00