Enclosure not stated · 1 knob
Parasit Studio Active Tilt EQVerified
Based on the Parasit Studio Active Tilt EQ
From the post
Per request. schematic is avaiable HERE.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.
Parts list 15 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this layout was not sure of
- C1 and C2 (right edge, rows A-C and H-J): no fixed value, chosen from the center-frequency table; 100nF / 10nF is only the first row
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×3 | 1M | 1M | read from the layout by eye | |
| ×2 | 100K | 100k | read from the layout by eye | |
| ×2 | 47K | 47k | read from the layout by eye | |
| ×2 | 10K | 10k | read from the layout by eye | |
| ×1 | 47Ω | 47 | read from the layout by eye | |
| Capacitors 6 | ||||
| ×1 | 100nF | 100n | read from the layout by eye | |
| ×1 | 1uF | 1u | read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| ×1 | 10uF | 10u | electrolytic; read from the layout by eye | |
| C1 | 100nF | 100n | sets center frequency: 64hz 100nF, 125hz 47nF, 250hz 22nF, 500hz 12nF, 1Khz 5.6nF, 2Khz 2.7nF, 4Khz 1.5nF; read from the layout by eye | |
| C2 | 10nF | 10n | sets center frequency: 64hz 10nF, 125hz 4.7nF, 250hz 2.2nF, 500hz 1.2nF, 1Khz 560pF, 2Khz 270pF, 4Khz 150pF; read from the layout by eye | |
| Diodes 1 | ||||
| D1 | 1N4001 | 1N4001 | read from the layout by eye | |
| ICs 1 | ||||
| IC1 | TL072 | TL072 | read from the layout by eye | |
| Potentiometers 1 | ||||
| Tone | B100K | B100k | Potentiometer | read from the layout by eye |
| Trimmers 1 | ||||
| Level | 500K | 500k | read from the layout by eye | |