Akashic Guitar effects circuit lookup
DISTORTIONVOLUME

Enclosure not stated · 2 knobs

Dirtbox Layouts

WTF Dist 250Verified

Based on the WTF Dist 250

Category
Distortion
Controls
Distortion · Volume
Build
Vero· 17×14· 13 cuts, 7 links
Layout
Verified · Dirtbox Layouts marks it as built and working
Tags
Distortion, DIY Designs, Overdrive, WTF

From the post

Pedro (WTFiCanBuildMyOwnPedals) came up with this distortion/overdrive a while ago. It takes elements from both DOD250 and Boss DS1 but it has its own thing going on. A bit less gain than a DS1 and cap values in the signal path is adjusted. The hard clipping diodes are a LED and a silicon diode for assymetric clipping

This one is verified by Pedro.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.

Parts list 22 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 8
×410K10kread from the layout by eye
×3100K100kread from the layout by eye
×22.2K2.2kread from the layout by eye
×1470K470kread from the layout by eye
×1330Ω330read from the layout by eye
×147K47kread from the layout by eye
×11M1Mread from the layout by eye
×1??LED resistor, value not given; read from the layout by eye
Capacitors 7
×21nF1nread from the layout by eye
×2100pF100pread from the layout by eye
×133nF33nread from the layout by eye
×1100nF100nread from the layout by eye
×21uF1uelectrolytic; read from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
×1100uF100uelectrolytic; read from the layout by eye
Diodes 2
D11N41481N41481N4148/1N914 (legend prints 1M914); read from the layout by eye
D31N58171N5817read from the layout by eye
Transistors 1
Q1BC546BC546read from the layout by eye
ICs 1
IC145584558read from the layout by eye
Potentiometers 2
DistortionC250KC250kPotentiometerread from the layout by eye
VolumeA100KA100kPotentiometerread from the layout by eye
LEDs 1
D23mm red LED3MM RED LEDon the board; read from the layout by eye