Enclosure not stated · 1 knob
JMK ParalyzerVerified
Based on the JMK Paralyzer· the maker's own board is Paralyzer by JMK PCBs
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×4 | 15K | 15k | read from the layout by eye | |
| ×5 | 100K | 100k | read from the layout by eye | |
| ×4 | 1M | 1M | read from the layout by eye | |
| ×2 | 47K | 47k | read from the layout by eye | |
| Capacitors 3 | ||||
| ×4 | 1uF | 1u | read from the layout by eye | |
| ×1 | 47nF | 47n | read from the layout by eye | |
| ×2 | 47uF | 47u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| D1 | 1N4001 | 1N4001 | read from the layout by eye | |
| ICs 2 | ||||
| IC1 | TL071 | TL071 | read from the layout by eye | |
| IC2 | TL072 | TL072 | read from the layout by eye | |
| Potentiometers 1 | ||||
| Blend | B10K | B10k | Potentiometer | read from the layout by eye |
Other boards based on the JMK Paralyzer
- Paralyzer the original · JMK PCBs · $9.00