Akashic Guitar effects circuit lookup
DRIVESAGVOLUME

Enclosure not stated · 3 knobs

Dirtbox Layouts

Fairfield Circuitry Barbershop Millenium (maybe...)Verified

Based on the Fairfield Circuitry Barbershop Millenium (maybe...)

Category
Overdrive
Controls
Drive · Sag · Volume
Build
Vero· 17×12· 17 cuts
Layout
Verified · Dirtbox Layouts marks it as built and working
Tags
Fairfield Circuitry, Overdrive

From the post

Per request. Note that the values for the treble cut capacitors is nor confirmed (10nF and 22nF) so it might be worth socketing these values. Also, I replaced the Drain resistors with trimpots for easier biasing for the J FETs.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.

Parts list 22 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 5
×147Ω47read from the layout by eye
×31K1kread from the layout by eye
×14.7K4.7kread from the layout by eye
×233K33kread from the layout by eye
×22M2Mread from the layout by eye
Capacitors 7
×1100pF100pread from the layout by eye
×210nF10nread from the layout by eye
×122nF22nread from the layout by eye
×147nF47nread from the layout by eye
×1100nF100nread from the layout by eye
×210uF10uelectrolytic; read from the layout by eye
×1220uF220uelectrolytic; read from the layout by eye
Diodes 1
D11N58171N5817read from the layout by eye
Transistors 3
Q1J201J201JFET; read from the layout by eye
Q2J201J201JFET; read from the layout by eye
Q3PN2222PN2222read from the layout by eye
Potentiometers 3
DriveA100KA100kPotentiometerread from the layout by eye
SagB10KB10kPotentiometerread from the layout by eye
VolumeA10KA10kPotentiometerread from the layout by eye
Trimmers 2
×120K20kprinted (8,2K): set to 8.2K; read from the layout by eye
×120K20kprinted (9,1K): set to 9.1K; read from the layout by eye
Switches 1
SwitchSPDT on/off/onSPDT ON/OFF/ONtoggle; read from the layout by eye