Enclosure not stated · 2 knobs

Ross Distortion w. Tan/Black switchVerified

Based on the Ross Distortion w. Tan/Black switch

Category: Distortion
Controls: Distort · Output
Build: Vero· 15×11· 11 cuts, 5 links
Layout: Verified · Dirtbox Layouts marks it as built and working
Tags: Distortion, Overdrive, Ross

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.

Parts list 18 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of

D2: legend lists it under both 1N270 (D1-D2) and 1N4148 (D2-D5); drawn like D1 at the top of columns 8-9, taken as 1N270

Ref	Value	Normalized	Type	Notes
Resistors 3
×5	1M	1M		read from the layout by eye
×2	10K	10k		read from the layout by eye
×1	4.7K	4.7k		read from the layout by eye
Capacitors 5
×2	1nF	1n		read from the layout by eye
×1	10nF	10n		read from the layout by eye
×1	47nF	47n		read from the layout by eye
×2	1uF	1u		electrolytic; read from the layout by eye
×1	47uF	47u		electrolytic; read from the layout by eye
Diodes 6
D1	1N270	1N270		read from the layout by eye
D2	1N270	1N270		legend also lists D2 under 1N4148; read from the layout by eye
D3	1N4148	1N4148		read from the layout by eye
D4	1N4148	1N4148		read from the layout by eye
D5	1N4148	1N4148		read from the layout by eye
D6	1N5817	1N5817		read from the layout by eye
ICs 1
IC1	4558	4558		read from the layout by eye
Potentiometers 2
Distort	C500K	C500k	Potentiometer	read from the layout by eye
Output	B50K	B50k	Potentiometer	read from the layout by eye
Switches 1
Switch	SPDT on/on	SPDT ON/ON		Tan/Black toggle; read from the layout by eye