Enclosure not stated · 1 knob
Fender Blender 3-knob BoosterVerified
Based on the Fender Blender 3 knob· 2 other boards clone it
From the post
This one is my favorite clean boost of all time and it is lifted from the obscure forgotten 3 knob Fender Blender. This rare bird had four tone settings; a great clean and poweful J FET based boost and three weak fuzz settings. The 2N5925 FET might be a bit hard to source but a 2N5457 sounds identical to my damaged ears. And while the original had a 50k pot this layout has 100kA for even more boost.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.
Parts list 12 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 2M | 2M | read from the layout by eye | |
| ×1 | 4.7K | 4.7k | read from the layout by eye | |
| ×1 | 10Ω | 10 | read from the layout by eye | |
| Capacitors 4 | ||||
| ×2 | 100nF | 100n | read from the layout by eye | |
| ×1 | 10nF | 10n | read from the layout by eye | |
| ×1 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | read from the layout by eye | |
| Transistors 1 | ||||
| Q1 | 2N5952 | 2N5952 | JFET; read from the layout by eye | |
| Potentiometers 1 | ||||
| Boost | A100K | A100k | Potentiometer | read from the layout by eye |
Other boards based on the Fender Blender 3 knob
- Fender Blender 3 knob Dirtbox Layouts
- Rejector Selector Moonn Electronics · €5.50