Enclosure not stated · 2 knobs
Earth Sounds Graphic FuzzVerified
Based on the Earth Sounds Graphic Fuzz
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.
Parts list 9 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×3 | 10K | 10k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 2.2M | 2.2M | read from the layout by eye | |
| ×1 | 220Ω | 220 | read from the layout by eye | |
| Capacitors 2 | ||||
| ×4 | 100nF | 100n | read from the layout by eye | |
| ×2 | 1uF | 1u | electrolytic; read from the layout by eye | |
| ICs 1 | ||||
| IC1 | LM741 | LM741 | read from the layout by eye | |
| Potentiometers 2 | ||||
| Freq | B1M | B1M | Potentiometer | read from the layout by eye |
| Level | A10K | A10k | Potentiometer | read from the layout by eye |