Enclosure not stated · 2 knobs
Seppuku Octave DroneVerified
Based on the Seppuku Octave Drone· 1 other board clones it
- Category
- Fuzz
- Controls
- Input Gain · Volume
- Build
- Vero· 14×8· 11 cuts, 2 links
- Layout
- Verified · Dirtbox Layouts marks it as built and working
- Tags
- Fuzz, Octave, Seppuku
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Dirtbox Layouts. No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 2 | ||||
| ×3 | 15K | 15k | read from the layout by eye | |
| ×1 | 100Ω | 100 | read from the layout by eye | |
| Capacitors 3 | ||||
| ×3 | 100nF | 100n | read from the layout by eye | |
| C1 | ? | ? | value not given; legend: value unconfirmed, try values between 4.7nF and 47nF; read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 3 | ||||
| D1 | 1N5817 | 1N5817 | read from the layout by eye | |
| D2 | 1N5817 | 1N5817 | read from the layout by eye | |
| D3 | 1N5817 | 1N5817 | read from the layout by eye | |
| Transistors 1 | ||||
| Q1 | 2N5088 | 2N5088 | read from the layout by eye | |
| ICs 1 | ||||
| IC1 | LM386 | LM386 | read from the layout by eye | |
| Potentiometers 2 | ||||
| Input Gain | B100K | B100k | Potentiometer | read from the layout by eye |
| Volume | A100K | A100k | Potentiometer | read from the layout by eye |
| Switches 1 | ||||
| Switch | SPDT | SPDT | toggle; read from the layout by eye | |
Other boards based on the Seppuku Octave Drone
- Seppuku Octave Drone Effects Layouts (blog) · 1590B