Reflektor

From the vendor

Our version of the SIB! Echodrive v.2 - Red unit. PLEASE READ WARNING AT END!

Heralded as a very warm, organic delay, mostly due to the 12AX7 tube used as a pre and post boost. We've managed to recreate it, but without having to resort to using 120v (or 240v for the rest of the world) mains power. A simple and cheap 12VAC/800mA wall wart will do. Highly sought after, and hard to find at a "decent" price.

THIS IS A PROJECT PLUS KIT CONSISTS OF; - ONE (1) PCB SET (Control and power/delay boards) - ONE (1) NEW POWER TRANSFORMER. - ONE (1) PT2395 DELAY CHIP - Tested for proper operation. - ONE (1) M5M4556AP-10 DRAM CHIP - Tested for proper operation. These parts are generally the hardest to source, so we've made an effort to find some, as well as test them, to take that pain away. With the component market being polluted with fake or defective parts more and more, it's a pain the DIY'er can do without. AVAILABILITY OF THIS PROJECT IS SUBJECT TO MARKET SUPPLY AND COST. IF IT'S SOLD OUT, PLEASE DON'T SEND US REQUESTS FOR IT. IF WE HAVE IT IN STOCK, WE'LL LET EVERYONE KNOW AT OUR FACEBOOK PAGE.

SHIPPING NOTE! To ensure delivery status, as with our prior project kit releases, THIS WILL ONLY SHIP AS PARCEL POST WITH TRACKING! If you wish us to ship it without tracking at a reduced cost, as we do all our regular DEFX projects, then please contact us before hand for a quote and we can invoice you. But... if it gets lost... we will not be held responsible. It's your problem, and your dime.

WARNING!! THIS PROJECT GENERATES HAZARDOUS VOLTAGES!! NOT RECOMMENDED FOR BEGINNERS OR BUILDERS NOT FAMILIAR WITH HIGH VOLTAGES REQUIRED FOR TUBE AMPLIFICATION!! The power section can develop up to 190vdc. Enough to certainly give a decent jolt, and perhaps in some cases, cause death. We only recommend that experienced builders, especially those with high voltage protocol understanding tackle this project. YOU HAVE BEEN DULY WARNED!!