1590D · 4 knobs
Hooke V.2
Based on the Spaceman Effects Orion reverb· 1 other board clones it
- Category
- Reverb
- Price
- $15.00in stock
From the vendor
Clone board of the Spaceman Effects Orion reverb. Great sounding reverb, in a convenient pedal format. Using the Accutronics blue reverb tank, and silent switching, it makes for a great portable reverb unit that you can use anywhere, with any amp.
NOTE: Be aware that at the end of the day, this is still a spring reverb, so if you go at it hard enough, you will get the customary spring crash. Please follow the build recommendations in the build document to avoid this. Unless crashing spring reverb is your thing... then carry on.
The v.2 version supersedes the original board, which used the MV-57B chip for the bypass. This new board uses the Coda bypass scheme. The preprogrammed PIC chip is available here; http://www.deadendfx.com/product/coda-bypass-pic
Schematic
The schematic is in the vendor's build document, page 8. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 46 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
ocr read from an image · sch paired from the schematic · fixed corrected by hand. Check marked values against the build document.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 19 | ||||
| R5 | 1Msch | 1M | ||
| R6 | 1Msch | 1M | ||
| R7 | 3K92sch | 3.92k | ||
| R8 | 100Ksch | 100k | ||
| R9 | 47Ksch | 47k | ||
| R10 | 392Ksch | 392k | ||
| R11 | 10Ksch | 10k | ||
| R12 | 10Ksch | 10k | ||
| R13 | 10Ksch | 10k | ||
| R14 | 10Ksch | 10k | ||
| R15 | 1Ksch | 1k | ||
| R16 | 100Ksch | 100k | ||
| R17 | 100Ksch | 100k | ||
| R18 | 4K76sch | 4.76k | ||
| R19 | 3K92sch | 3.92k | ||
| R20 | 10Ksch | 10k | ||
| R21 | 100Ksch | 100k | ||
| R22 | 10Ksch | 10k | ||
| R1 | 1Msch | 1M | ||
| Capacitors 21 | ||||
| C8 | 680psch | 680p | ||
| C9 | 100nsch | 100n | ||
| C10 | 100nsch | 100n | ||
| C11 | 1usch | 1u | ||
| C12 | 2n2sch | 2.2n | ||
| C13 | 10nsch | 10n | ||
| C14 | 1usch | 1u | ||
| C15 | 3n3sch | 3.3n | ||
| C16 | 6n8sch | 6.8n | ||
| C17 | 10nsch | 10n | ||
| C18 | 680psch | 680p | ||
| C19 | 1usch | 1u | ||
| C20 | 1usch | 1u | ||
| C21 | 1usch | 1u | ||
| C22 | 1usch | 1u | ||
| C1 | 100nsch | 100n | ||
| C2 | 100nsch | 100n | ||
| C3 | 100nsch | 100n | ||
| C4 | 100nsch | 100n | ||
| C5 | 100psch | 100p | ||
| C6 | 100psch | 100p | ||
| Transistors 1 | ||||
| Q2 | BS250sch | BS250 | ||
| ICs 1 | ||||
| IC3 | TDA7052sch | TDA7052 | ||
| Potentiometers 4 | ||||
| Blend | B10Ksch | B10k | Potentiometer | |
| Dwell | B100Ksch | B100k | Potentiometer | |
| Tone | B50Ksch | B50k | Potentiometer | |
| Vol | A100Ksch | A100k | Potentiometer | |
Other boards based on the Spaceman Effects Orion reverb
- Spaceman Effects Orion Reverb Dirtbox Layouts