125B · 6 knobs
Bow Echo
The original Dead Air Bow Echo· 1 other board or layout builds it
- Category
- Delay
- Price
- $11.00in stock
From the vendor
Fuzz/Delay DIY PCB
Includes:
Bow Echo PCB Bow Echo PCB for Foot Switch ( 3PDT )
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 30 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| R1 | 2.2M | 2.2M | ||
| R2 | 2.7k | 2.7k | ||
| R3 | 1k | 1k | ||
| R4 | 2.7k | 2.7k | ||
| R5 | 1M | 1M | ||
| R6 | 1k | 1k | ||
| R7 | 100k | 100k | ||
| R8 | 10k | 10k | ||
| R9 | 10k | 10k | ||
| CLR | 4.7k | 4.7k | ||
| Capacitors 12 | ||||
| C1 | 100uf | 100u | Electrolytic | |
| C2 | 100uf | 100u | Electrolytic | |
| C3 | 470nf | 470n | Film | |
| C4 | 47nf | 47n | Film | |
| C5 | 100nf | 100n | Film | |
| C6 | 4.7nf | 4.7n | Film | |
| C7 | 10uf | 10u | Electrolytic | |
| C8 | 100nf | 100n | Film | |
| C9 | 1uf | 1u | Film | |
| C10 | 100nf | 100n | Film | |
| C11 | 2.2uf | 2.2u | Electrolytic | |
| C12 | 10nf | 10n | Film | |
| Diodes 1 | ||||
| D1 | 1n5818 | 1N5818 | ||
| ICs 1 | ||||
| REG | 78L05 | 78L05 | 5 VOLT REGULATOR | |
| Potentiometers 6 | ||||
| Volume | A100K | A100k | Potentiometer | |
| Modulation | B2M | B2M | Potentiometer | |
| Diffuse | A50K | A50k | Potentiometer | |
| Time | B50K | B50k | Potentiometer | |
| Starve | A5K | A5k | Potentiometer | |
| Feedback | C50K | C50k | Potentiometer | |
Other boards based on the Dead Air Bow Echo
- Dead Air Bow Echo Dirtbox Layouts