125B · 5 knobs
VelorumDynamic Overdrive
Based on the Ibanez/Vemuram TSV808
- Category
- Overdrive
- Controls
- Drive · Treble · Bass · Saturation · Volume
- Difficulty
- Easy
- Price
- $12.50in stock
From the vendor
A limited-edition collaboration between Ibanez and Vemuram that combines elements of the Tube Screamer and Jan Ray to create a highly tweakable transparent overdrive.
The Velorum Dynamic Overdrive is based on the Ibanez/Vemuram TSV808, a limited-run collaboration between Ibanez and Vemuram combining their Tube Screamer and Jan Ray pedals. It was originally released in 2019 and had completely sold out within a year or two, and since then they have fetched upwards of $2,000 on the used market.
It was traced by The Tone Geek in 2022 who verified that it was pretty much exactly as described in the marketing. The first stage of the circuit is very similar to the Jan Ray, while the second stage is much like a Tube Screamer tone stack but with the tone control fixed to a specific position. All in all, it resembles a Jan Ray more than a Tube Screamer—but the two circuits were already fairly similar, so the distinction is not as black-and-white.
The clean 3-knob control layout is deceptively simplistic. There are two additional trimmers inside the pedal, Bass and Saturation, that can be adjusted from the north side using a screwdriver. There are also DIP switches inside the pedal to select between symmetric and asymmetric clipping modes.
The Velorum project is a direct adaptation of the TSV808, but with all controls moved to the front of the enclosure for easy access. The trimmers have been converted to standard potentiometers. The DIP switches have been merged into a single 3-way toggle switch that selects between Tube Screamer mode (one diode in each direction), asymmetric mode (one diode in one direction and two in the other), and a third mode with two diodes in each direction.
Schematic
The schematic is in the vendor's build document, page 6. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 50 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 18 | ||||
| R1 | 1k | 1k | Metal film resistor, 1/4W | |
| R2 | 510k | 510k | Metal film resistor, 1/4W | |
| R3 | 33k | 33k | Metal film resistor, 1/4W | |
| R4 | 10k | 10k | Metal film resistor, 1/4W | |
| R5 | 10k | 10k | Metal film resistor, 1/4W | |
| R6 | 1k | 1k | Metal film resistor, 1/4W | |
| R7 | 1k | 1k | Metal film resistor, 1/4W | |
| R8 | 10k | 10k | Metal film resistor, 1/4W | |
| R9 | 6k8 | 6.8k | Metal film resistor, 1/4W | |
| R10 | 10k | 10k | Metal film resistor, 1/4W | |
| R11 | 4k7 | 4.7k | Metal film resistor, 1/4W | |
| R12 | 12k | 12k | Metal film resistor, 1/4W | |
| R13 | 100R | 100 | Metal film resistor, 1/4W | |
| R14 | 9k1 | 9.1k | Metal film resistor, 1/4W | |
| R15 | 7k5 | 7.5k | Metal film resistor, 1/4W | |
| R16 | 100R | 100 | Metal film resistor, 1/4W | Power supply filter resistor. |
| RPD | 1M | 1M | Metal film resistor, 1/4W | Input pulldown resistor. |
| LEDR | 10k | 10k | Metal film resistor, 1/4W | LED current-limiting resistor. Adjust value to change LED brightness. |
| Capacitors 13 | ||||
| C1 | 27n | 27n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 22pF | 22p | MLCC capacitor, NP0/C0G | |
| C3 | 47pF | 47p | MLCC capacitor, NP0/C0G | Original uses 51pF, but 47pF is easier to find and will perform the same. |
| C4 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 47n | 47n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 33n | 33n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 82n | 82n | Film capacitor, 7.2 x 2.5mm | |
| C8 | 1uF | 1u | Film capacitor, 7.2 x 3.5mm | |
| C9 | 150pF | 150p | MLCC capacitor, NP0/C0G | |
| C10 | 1uF | 1u | Film capacitor, 7.2 x 3.5mm | |
| C11 | 47uF | 47u | Electrolytic capacitor, 5mm | Reference voltage filter capacitor. |
| C12 | 100uF | 100u | Electrolytic capacitor, 6.3mm | Power supply filter capacitor. |
| C13 | 100n | 100n | MLCC capacitor, X7R | Power supply filter capacitor. |
| Diodes 5 | ||||
| D1 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D2 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| D3 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| D4 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| D5 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| ICs 1 | ||||
| IC1 | OPA2134 | OPA2134 | Operational amplifier, dual, DIP8 | |
| Potentiometers 5 | ||||
| DRIVE | 500kA | A500k | 16mm right-angle PCB mount pot | Audio (log) taper. |
| SAT. | 10kB | B10k | 16mm right-angle PCB mount pot | Linear taper. |
| TREBLE | 10kB | B10k | 16mm right-angle PCB mount pot | Linear taper. |
| BASS | 50kC | C50k | 16mm right-angle PCB mount pot | Reverse audio (reverse log or antilog) taper. |
| VOLUME | 10kA | A10k | 16mm right-angle PCB mount pot | Audio (log) taper. |
| Switches 2 | ||||
| CLIP | DPDT on-on-on | DPDT ON-ON-ON | Toggle switch, DPDT on-on-on | |
| FSW | 3PDT | 3PDT | Stomp switch, 3PDT | Available from Aion FX. |
| Jacks & sockets 4 | ||||
| IC1-S | DIP-8 socket | DIP-8 SOCKET | IC socket, DIP-8 | |
| IN | 1/4" stereo | 1/4" STEREO | 1/4" phone jack, closed frame | Switchcraft 112BX or equivalent. |
| OUT | 1/4" mono | 1/4" MONO | 1/4" phone jack, closed frame | Switchcraft 111X or equivalent. |
| DC | 2.1mm | 2.1MM | DC jack, 2.1mm panel mount | Lumberg NEB/J 21 C or equivalent. |
| Hardware 2 | ||||
| BATT | Battery snap | BATTERY SNAP | 9V battery snap | Optional. Use the soft plastic type—the hard-shell type will not fit. |
| ENC | 125B | 125B | Enclosure, die-cast aluminum | Can also use a Hammond 1590N1. |