125B · 4 knobs
Supreaux Deux
Based on the Runoffgroove Supreaux Deux
- Category
- Overdrive· JFET Overdrive
- Controls
- Drive · Tone · Volume · Bottom
- Difficulty
- Intermediate
- Price
- $12.50in stock
From the vendor
An updated version of the original Runoffgroove Supreaux, an adaptation of the Supro 16T amplifier with JFETs replacing the tube stages.
The Runoffgroove Supreaux Deux is an updated version of the Supreaux circuit, a JFET adaptation of the Supro 16T amplifier. The original Supreaux circuit, originally designed in 2004, is well-known as the source circuit for the JHS Superbolt and is also available as a PCB from Aion FX.
The Supreaux Deux was designed in 2008 in order to be more accurate to the sound of the Supro amp. As the original circuit had grown in popularity, the Runoffgroove team decided that they could do better, and the end result is something that they felt was even closer to the original amp’s character.
The Aion FX version of the Supreaux Deux is a direct adaptation of the original circuit, but with two modifications. First, since the original circuit needs 18V power to sound right, a charge pump has been added to get 18V from a standard 9V input. In addition, another position has been added to the Bottom switch allowing for three settings instead of two.
Since the J201 is very difficult to find in TO-92 through-hole format, and many DIY hobbyists are intimidated by SMD parts, Aion FX offers J201s in SMD format that have been pre-soldered to adapters so they can be used as through-hole parts.
Schematic
The schematic is in the vendor's build document, page 6. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 52 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 13 | ||||
| R1 | 100k | 100k | Metal film resistor, 1/4W | |
| R2 | 390R | 390 | Metal film resistor, 1/4W | |
| R3 | 56k | 56k | Metal film resistor, 1/4W | |
| R4 | 1M | 1M | Metal film resistor, 1/4W | |
| R5 | 1M | 1M | Metal film resistor, 1/4W | |
| R6 | 1k | 1k | Metal film resistor, 1/4W | |
| R7 | 100k | 100k | Metal film resistor, 1/4W | |
| R8 | 1M | 1M | Metal film resistor, 1/4W | |
| R9 | 390R | 390 | Metal film resistor, 1/4W | |
| R10 | 22k | 22k | Metal film resistor, 1/4W | |
| R11 | 100R | 100 | Metal film resistor, 1/4W | |
| RPD | 2M2 | 2.2M | Metal film resistor, 1/4W | Input pulldown resistor. |
| LEDR | 4k7 | 4.7k | Metal film resistor, 1/4W | LED current-limiting resistor. Adjust value to change LED brightness. |
| Capacitors 16 | ||||
| C1 | 270pF | 270p | MLCC capacitor, NP0/C0G | |
| C2 | 470pF | 470p | MLCC capacitor, NP0/C0G | |
| C3 | 2n2 | 2.2n | Film capacitor, 7.2 x 2.5mm | |
| C4 | 2n2 | 2.2n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 10n | 10n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 470pF | 470p | MLCC capacitor, NP0/C0G | |
| C7 | 1n5 | 1.5n | Film capacitor, 7.2 x 2.5mm | |
| C8 | 4n7 | 4.7n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 1n5 | 1.5n | Film capacitor, 7.2 x 2.5mm | |
| C10 | 68n | 68n | Film capacitor, 7.2 x 2.5mm | |
| C11 | 470n | 470n | MLCC capacitor, X7R | Power supply filter capacitor. |
| C12 | 10uF | 10u | Electrolytic capacitor, 5mm | Power supply filter capacitor. |
| C13 | 47uF | 47u | Electrolytic capacitor, 5mm | Power supply filter capacitor. |
| C14 | 470n | 470n | MLCC capacitor, X7R | Power supply filter capacitor. |
| C15 | 100uF | 100u | Electrolytic capacitor, 6.3mm | Power supply filter capacitor. |
| C16 | 100n | 100n | MLCC capacitor, X7R | Power supply filter capacitor. |
| Diodes 4 | ||||
| D1 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D2 | 1N4742A | 1N4742A | Zener diode, 12V, DO-41 | |
| D3 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D4 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| Transistors 3 | ||||
| Q1 | 2N5457 | 2N5457 | JFET, N-channel, TO-92 or SOT-23 | Can use either 2N5457 (through-hole) or MMBF5457 (SMD). |
| Q2 | J201 | J201 | JFET, N-channel, TO-92 or SOT-23 | Can use either J201 (through-hole) or MMBFJ201 (SMD). |
| Q3 | 2N5457 | 2N5457 | JFET, N-channel, TO-92 or SOT-23 | Can use either 2N5457 (through-hole) or MMBF5457 (SMD). |
| ICs 1 | ||||
| IC1 | TC1044SCPA Charg | TC1044SCPA CHARG | e pump, DIP8 | |
| Potentiometers 3 | ||||
| TONE | 500kA | A500k | 16mm right-angle PCB mount pot | |
| GAIN | 500kA | A500k | 16mm right-angle PCB mount pot | |
| VOL. | 100kA | A100k | 16mm right-angle PCB mount pot | |
| Trimmers 3 | ||||
| Q1_TR | 10k | 10k | Trimmer, 10%, 1/4" | |
| Q2_TR | 50k | 50k | Trimmer, 10%, 1/4" | |
| Q3_TR | 10k | 10k | Trimmer, 10%, 1/4" | |
| Switches 2 | ||||
| BTM | SPDT cntr off | SPDT CNTR OFF | Toggle switch, SPDT on-off-on | |
| FSW | 3PDT | 3PDT | Stomp switch, 3PDT | |
| LEDs 1 | ||||
| LED | 5mm | 5MM | LED, 5mm, red diffused | |
| Jacks & sockets 4 | ||||
| IC1-S | DIP-8 socket | DIP-8 SOCKET | IC socket, DIP-8 | |
| IN | 1/4" stereo | 1/4" STEREO | 1/4" phone jack, closed frame | Switchcraft 112BX or equivalent. |
| OUT | 1/4" mono | 1/4" MONO | 1/4" phone jack, closed frame | Switchcraft 111X or equivalent. |
| DC | 2.1mm | 2.1MM | DC jack, 2.1mm panel mount | Mouser 163-4302-E or equivalent. |
| Hardware 2 | ||||
| BATT | Battery snap | BATTERY SNAP | 9V battery snap | Optional. Use the soft plastic type—the hard-shell type will not fit. |
| ENC | 125B | 125B | Enclosure, die-cast aluminum | Can also use a Hammond 1590N1. |