125B · 3 knobs
NaosClassic Overdrive
Based on the Yamaha OD-10MII Overdrive
- Category
- Overdrive
- Controls
- Overdrive · Tone · Level
- Difficulty
- Beginner
- Price
- $12.50in stock
From the vendor
A simple yet effective drive circuit that combines a Tube Screamer-style clipping section with a Big Muff-style tone control, it’s more transparent than a Tube Screamer with less of a midrange emphasis.
The Naos Classic Overdrive is based on the Yamaha OD-10MII, an overdrive pedal originally released in 1987 as part of Yamaha’s “Sound Device Series” (SDS).
The OD-10MII is very similar to the Fuzztone, a DIY project designed by Dan Coggins (Lovetone/Dinosaural) for the magazine Electronics Today International in 1993 (available from Aion FX as the Atom Fuzz Drive). The main difference is in the clipping diode arrangement and the OD-10MII’s inclusion of an input buffer. Most of the component values are also different, so the two pedals sound nothing alike, but the similarities are hard to miss when looking at the two schematics side by side.
With this said, it’s unlikely that Dan referenced the OD-10MII when designing the Fuzztone, as the main building blocks of the circuit are fairly basic. But, it bears mentioning since the OD-10MII predated the Fuzztone by six years.
The Naos is a direct adaptation of the original Yamaha unit except that the flip-flop bypass has been replaced with standard true bypass.
Schematic
The schematic is in the vendor's build document, page 5. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 44 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 17 | ||||
| R1 | 10k | 10k | Metal film resistor, 1/4W | |
| R2 | 1M | 1M | Metal film resistor, 1/4W | |
| R3 | 100k | 100k | Metal film resistor, 1/4W | |
| R4 | 12k | 12k | Metal film resistor, 1/4W | |
| R5 | 220R | 220 | Metal film resistor, 1/4W | |
| R6 | 18k | 18k | Metal film resistor, 1/4W | |
| R7 | 18k | 18k | Metal film resistor, 1/4W | |
| R8 | 18k | 18k | Metal film resistor, 1/4W | |
| R9 | 220k | 220k | Metal film resistor, 1/4W | |
| R10 | 10k | 10k | Metal film resistor, 1/4W | |
| R11 | 470R | 470 | Metal film resistor, 1/4W | |
| R12 | 100k | 100k | Metal film resistor, 1/4W | |
| R13 | 22k | 22k | Metal film resistor, 1/4W | |
| R14 | 22k | 22k | Metal film resistor, 1/4W | |
| R15 | 100R | 100 | Metal film resistor, 1/4W | |
| RPD | 2M2 | 2.2M | Metal film resistor, 1/4W | |
| LEDR | 4k7 | 4.7k | Metal film resistor, 1/4W | |
| Capacitors 11 | ||||
| C1 | 47n | 47n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 47n | 47n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 560pF | 560p | MLCC capacitor, NP0/C0G | |
| C4 | 1uF | 1u | Film capacitor, 7.2 x 3.5mm | |
| C5 | 1uF | 1u | Film capacitor, 7.2 x 3.5mm | |
| C6 | 47n | 47n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 1uF | 1u | Film capacitor, 7.2 x 3.5mm | |
| C8 | 1uF | 1u | Film capacitor, 7.2 x 3.5mm | |
| C9 | 47uF | 47u | Electrolytic capacitor, 5mm | Reference voltage filter capacitor. |
| C10 | 100uF | 100u | Electrolytic capacitor, 6.3mm | Power supply filter capacitor. |
| C11 | 100n | 100n | MLCC capacitor, X7R | Power supply filter capacitor. |
| Diodes 5 | ||||
| D1 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D2 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| D3 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| D4 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| D5 | 1N914 | 1N914 | Fast-switching diode, DO-35 | |
| Transistors 1 | ||||
| Q1 | 2N5088 | 2N5088 | BJT transistor, NPN, TO-92 | |
| ICs 1 | ||||
| IC1 | RC4559P | RC4559P | Operational amplifier, DIP8 | |
| Potentiometers 3 | ||||
| DRIVE | 100kA | A100k | 16mm right-angle PCB mount pot | |
| TONE | 100kA | A100k | 16mm right-angle PCB mount pot | |
| LEVEL | 100kB | B100k | 16mm right-angle PCB mount pot | |
| Switches 1 | ||||
| FSW | 3PDT | 3PDT | Stomp switch, 3PDT | |
| Jacks & sockets 4 | ||||
| IC1-S | DIP-8 socket | DIP-8 SOCKET | IC socket, DIP-8 | |
| IN | 1/4" stereo | 1/4" STEREO | 1/4" phone jack, closed frame | Switchcraft 112BX or equivalent. |
| OUT | 1/4" mono | 1/4" MONO | 1/4" phone jack, closed frame | Switchcraft 111X or equivalent. |
| DC | 2.1mm | 2.1MM | DC jack, 2.1mm panel mount | Mouser 163-4302-E or equivalent. |
| Hardware 1 | ||||
| ENC | 125B | 125B | Enclosure, die-cast aluminum | Can also use a Hammond 1590N1. |