Asteria Mk. IIIPreamp Drive

From the vendor

An adaptation of the Fender Deluxe 5E3 amplifier from 1955, a classic low-wattage amplifier noted for its harmonically-rich breakup that can be achieved at low volumes.

The Asteria Preamp Drive Mk. III is an adaptation of the Catalinbread Formula 55, based on the Fender 5E3 Tweed Deluxe amplifiers from the 1950s. It was originally released in 2017, the third version of the original Formula No. 5, but different enough that they changed the name.

The Formula 55 replicates the quirks of the original Deluxe amp, including a tone control whose effect diminishes as the gain is turned up, with almost no change across the sweep at maximum drive. While the original amp only had Gain and Tone knobs, this circuit adds a master volume, Presence control, and a toggle switch to increase the gain.

Like several other Catalinbread pedals, this circuit blurs the line between a preamp and an overdrive. Like a true preamplifier, it’s very reactive to what comes before it, so it’s best placed after other drive pedals but before modulation. However, it also generates more than enough drive on its own and can be used as a standalone overdrive pedal just like any other.

The Formula 55 was preceded by two versions of the Formula No. 5 in 2010 and 2011. These are available from Aion FX as the Asteria Mk. I and Asteria Mk. II.

The original Formula 55 used MPF4393 JFETs, which are no longer produced. Aion FX carries the original MPF4393 in sets of 5. The PCB also has an extra pad so that surface-mount JFETs can be used (part number MMBF4393), which are still in production and perform identically to those used in Catalinbread pedals. See build notes for more details.

The Asteria Mk. III is compatible with the 18V Voltage Doubler / Bypass module if you want to run the circuit at 18V without an external adapter. The higher voltage provides increased volume and clarity.

Note: This project uses a type of capacitor that has been temporarily discontinued by WIMA. Please see our news article about the issue and the substitution spreadsheet for project-specific recommendations. We are stocking a limited supply in the mean time. The build document has not yet been updated to reflect this.