Enclosure not stated
3PDT Bypass
- Category
- Utility
- Price
- see vendor
Schematic
The schematic is in the vendor's build document, page 2. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 9 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
ocr read from an image · sch paired from the schematic · fixed corrected by hand. Check marked values against the build document.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| ×1 | 47-100R | 47-100 | Metal film resistor, 1/4W | Filter resistor. Can jumper on higher-current circuits. |
| LEDR | 10k | 10k | Metal film resistor, 1/4W | LED current-limiting resistor. Recommended value is 10k. |
| R1 | 47Rsch | 47 | ||
| Capacitors 2 | ||||
| ×1 | 100n | 100n | MLCC capacitor, X7R | Filter capacitor. |
| C1 | 100nsch | 100n | ||
| Diodes 2 | ||||
| ×1 | 1N5817 | 1N5817 | Schottky diode, DO-41 | Can also substitute 1N4001, but the output voltage will be slightly lower. |
| D1 | 1N5817sch | 1N5817 | ||
| Switches 2 | ||||
| ×1 | 3PDT BYPASS PCB | 3PDT BYPASS PCB | shopping list | |
| ×2 | 3PDT BYPASS PCB | 3PDT BYPASS PCB | shopping list | |